Electro-Voice ND96-RC3 Wireless Head with ND96 Capsule

Electro-Voice ND96-RC3 Wireless Head with ND96 Capsule

TheElectro-Voice ND96-RC3 is a robust, highperformance, dynamic cardioid thread-onvocal microphone head for wireless handheld transmitters. This microphone headelectrically and mechanically adapts to Electro-Voice (and many other brands)wireless handheld transmitters that use the common 3-contact rings, 1.25”diameter by 28-thread pitch coupling convention. The floating captured IDcollar will spin freely until screwing the head on tightly. It will remainlocked in place when fully tightened. This allows the desired orientation ofthe branding to the transmitter.

Designed forexcellent acoustic control on very loud stages, the ND96-RC3 special structuraland acoustical designs create performance characteristics allowing themicrophone’s gain before feedback in a mi to be

significantlylouder than most microphones.

Themicrophone head’s dynamic capsule contains a large Mylar diaphragm, whichdelivers a rich and detailed frequency response by combining its large surfacearea for tonal balance with its low-mass highvelocity material forexceptionally fast transient response.

Themicrophone head features a selectable vocal presence tuning that can be engagedto reduce certain low-mid frequency areas and emphasize key uppermidrange vocalpresence areas to increase intelligibility in high-energy reinforcement (seecharts). The microphone head features an innovative capsule shock-mount systemconsisting of a 4-point suspension around the circumference of the capsulecombined with a tuned pneumatic pump at the capsule base, offering superiorhandling noise reduction to eliminate mechanical vibrations and noise in themix.

TheMemraflex grille is made of a durable tight-mesh grille wire that wIt’standsextraordinarily rough treatment. Your microphone head remains protected andlooking good gig-after-gig, year-after-year. For additional protection, thecapsule contains a hydrophobic cloth membrane, which prevents moisture anddebris from reaching the diaphragm. The capsule uses a humbucking coil thatattenuates AC hum and electromagnetic interference. Use the ND dynamic micswith confidence near speaker cabinets and EMF generating equipment racks.

Key Features

• Thread-onmicrophone head for Electro-Voice and other brand’s wireless handheldtransmitters
• Excellentacoustic control on very loud stages: exceptionally high gain before feedback
• Largediaphragm dynamic capsule creates a rich and detailed frequency response
• Vocalpresence emphasis switch selects between alternate sonic signatures
• Shock-mountedcapsule minimizes handling noise

Technical Specifications

Element type
Dynamicneodymium magnet structure
Frequency response, close
30 Hz-15 kHz
Frequency response, far
140 Hz-15kHz
Polar pattern
Supercardioid
Sensitivity, open circuitvoltage @ 1 kHz inflatposition
4.7mV/Pascal (-46.5 dBV/Pa)
Sensitivity, open circuitvoltage @ 1 kHz invocalpresence position
3.2mV/Pascal (-50 dBV/Pa)
Maximum SPL
136.5 dB SPL(1% THD)
Impedance
1000 ohms
Power requirements
4-8 VDC
Polarity
Positivepressure on diaphragmproduces positive voltage at centercontact relative toground contact
Electrical contact
3-Ring/3-Pin
Threaded coupling
1.25″diameter
28 UN-2Athread pitch
Finish
Blackpolyurethane paint
Materials
Aluminum,steel, steel wire grillescreen
Dimensions, length diameter
3.3 in.(83.5 mm)2.0 in. (50.5 mm)
Net weight
6.8 oz (193g)
Shipping weight
8.7 oz (247g)